Our chrome Vega steering box bolts up to all normal Vega-type brackets and accepts Vega spline U-joints, pitman arms, and accessories.

• Durable cast iron and machined steel construction
• Gives years of high-mileage service
• Faithful reproduction of size, shape and mounting hole locations
• No core charge

Notes

1. Must use pitman arm
2. Recommended for vehicles under 2800 lbs.
3. The Vega box is the best choice for Model T - 1934 Ford chassis. 1935-48 chassis can use this Vega box

Specs

• Input shaft (for steering u-joint)
  • 5/8-36 spline
• Output Shaft (for Pitman arm):
  • 1" O.D.
  • 4 master splined shaft
  • Splined area tapers from .997" to .934"
• Centerline through the output shaft to the front of the box is about 3"
• Overall length of the box not including the input shaft is 5-3/4"
• Input shaft extend rearward 1-3/16"
• From adjust screw to end of output shaft is 8"
• From outside of box to area on mounting surface is 4-1/2"
• Box has a swell in the casting that extends past the mounting legs an additional 1/4"
• Mounting pattern is 2-3/4" and 4-3/8" center to center of the three mounting holes

Vega steering box is not adjusted at the factory and therefore it is necessary that the steering box be adjusted upon installation.