Dual feed master cylinder with 2 bolt flange style mount. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear). Will also work with disc/disc rear.

• Uses 3/8"-24 female inverted flare outlets
• Mounting bolt holes are 3/8" or 10mm
• 7 1/4" long without pushrod, add 2" for the pushrod
• 3" wide from the outside of the reservoir to the edge of the outlets
• mounting flange is 4" wide
• Master Cylinder is also 3-7/16" tall without the cap
• Push rod is threaded 3/8"-24 (fine thread). 

Specs:

Centerline of Holes: 3.25

Material Type: Steel

Overall Height: 5.00

Overall width: 4.00

Mounted length: 7.00

Bore size: 1"

Feed: Dual

Outlet Fitting:  3/8"-24IFF

Tech Tip: The bigger the master cylinder is, the more fluid you get, but you'll have less pressure at the caliper.

Warning: There is no longer a loop on the end of the push rod for this master cylinder. It is now threaded 3/8"-24 (fine) male.